
SEEMP Part III transforms the IMO’s Carbon Intensity Indicator (CII) from a passive annual rating into a proactive, three-year operational strategy for vessels of 5,000 GT and above. By establishing forward-looking carbon reduction targets, monitoring fuel consumption telemetry, and enforcing corrective action plans, SEEMP Part III empowers shipowners and technical managers to maintain regulatory compliance under MARPOL Annex VI while optimizing fleet-wide energy performance.
SEEMP Part III is the mandatory part of the Ship Energy Efficiency Management Plan that shows how an applicable vessel will manage its Carbon Intensity Indicator (CII) under MARPOL Annex VI. For ships of 5,000 GT and above that fall within the CII framework, the plan looks ahead: it sets required CII values for the next three years, explains how the vessel intends to achieve them, and establishes how performance will be reviewed.
For shipowners and operators, this turns CII from an annual rating into an ongoing management issue. The question is no longer simply, “What rating did the ship receive?” It is also, “Where is performance heading, and do we need to act?”
Every applicable vessel receives an annual CII rating from A to E. A represents superior performance, while C represents the required rating level. Ratings of D and E indicate weaker carbon-intensity performance and can eventually trigger corrective action.
However, the rating itself arrives after the performance has already occurred. That is why operators need to look at what is happening between reporting dates.
Take a vessel that achieves C for another year. On paper, it has met the required level. Yet if fuel consumption is rising and its attained CII is moving progressively closer to D, management has a different picture: the vessel is compliant today, but its performance direction requires attention.
This is also why CII regulations are changing shipping practices. They bring operational efficiency, emissions, and regulatory performance into the same conversation.
The SEEMP Part 3 requirements are designed to show how a ship will achieve its required annual operational CII over the next three years.
In practical terms, the plan needs to address:
These requirements create a clear cycle: set the target, monitor performance, evaluate the result, and improve where necessary.
The real work, however, sits between those stages. Operators need to understand what is driving the vessel’s performance. For one ship, hull condition may be significant. For another, the bigger issue may be speed, machinery efficiency, voyage planning, or time spent waiting for a berth.
That is where SEEMP Part III becomes specific to the vessel rather than simply another compliance document.
CII measures a vessel’s operational carbon intensity using its CO2 emissions in relation to its capacity and distance travelled. Its attained annual CII is then compared with the required value to determine the A-to-E rating.
Why does this distinction matter?
Because two ships can face very different operational conditions even when they are working towards the same regulatory objective. Their efficiency measures therefore need to reflect how they actually trade and operate.
For example, if fuel consumption begins rising across a series of comparable voyages, management can investigate before the annual rating confirms a larger problem. Hull fouling may be increasing resistance. Machinery performance may have changed. Alternatively, voyage execution could be creating unnecessary fuel use.
Looking at EEOI and ship energy efficiency can also give operators another way to understand emissions in relation to transport work and build a broader view of operational performance.

This is where CII performance moves from an operational concern to a specific compliance requirement.
A vessel receiving an E rating for one year, or a D rating for three consecutive years, must develop corrective actions showing how it will achieve the required annual operational CII and return to C or better. SEEMP Part III then needs to be revised to incorporate those corrective actions and proceed through the required verification process.
Still, an effective response starts before measures are selected. Management first needs to identify why performance deteriorated. Imagine a vessel repeatedly increasing speed to meet an expected arrival time, then spending hours waiting outside the port. Installing new efficiency technology may deliver some benefit, but it does not address the operational pattern creating unnecessary fuel consumption.
In that case, better arrival planning and coordination may deserve greater attention. A structured CII improvement plan helps operators make that connection between the rating, its causes, and the actions most likely to improve it.
There is no universal route to a better CII rating. Measures need to suit the ship, its condition, and the way it operates.
Depending on the performance issue, operators may consider:
The key is to avoid treating every efficiency measure as equally relevant.
If hull fouling is increasing resistance, maintenance becomes an obvious priority. If repeated speed changes are driving fuel consumption, voyage execution deserves closer attention. And if machinery performance is deteriorating, the response needs to address that technical cause.
In other words, improvement starts with diagnosis.
Even the strongest plan has limited value if it stays within the compliance function. Energy performance is shaped by decisions made onboard and ashore, which means several teams need to understand their role.
Masters and chief engineers influence vessel operation directly. Meanwhile, technical managers, operations teams, and fleet managers can affect maintenance, voyage instructions, scheduling, and investment decisions.
So, coordination matters. Teams need to know what they are monitoring, when a deviation requires investigation, and who has responsibility for acting on the findings.
This is where Ship Energy Efficiency Management training can help maritime professionals connect regulatory requirements with the practical decisions that influence vessel efficiency and CII performance.
As requirements become progressively stricter, that capability becomes even more valuable. Acting while a vessel still has performance margin gives management more options than waiting until corrective action becomes mandatory.
A useful review should test whether the plan works in practice, rather than simply confirm that the required document is onboard.
Ask:
For a fleet manager, these questions also provide a useful way to prioritise attention. A vessel moving steadily towards a weaker rating may need support before another ship that currently has greater performance margin.
CII may be calculated vessel by vessel, but its implications extend across the fleet.
A pattern of deteriorating ratings can point to wider issues in maintenance strategy, voyage execution, operational practices, or investment priorities. Conversely, understanding which measures work well on individual vessels can help management identify approaches that may be relevant elsewhere.
This gives SEEMP Part III a wider management role. It creates a structured link between environmental compliance and decisions around fuel consumption, maintenance, vessel operation, and technical investment.
For leadership teams, the value lies in visibility. Knowing where performance is heading allows resources to be directed earlier and more deliberately, rather than responding only when a poor rating creates an immediate compliance requirement.
SEEMP Part III gives operators a structured way to understand where a vessel’s CII performance is heading and what needs to happen next. It connects future targets with operational measures, ongoing evaluation, and corrective action when required.
For maritime leaders, that creates a practical advantage: more time to make informed decisions. When efficiency trends are visible early, management can address the cause, prioritise the right resources, and improve vessel performance before a manageable issue develops into a more difficult compliance challenge.